Flexible Mini Greenhouse-Dome with Pot (clickab

Flexible Mini Greenhouse-Dome with Pot (clickable)

Flexible Mini Greenhouse-Dome with Pot (clickable)

bygraphis licensed under theCreative Commons – Attribution – Non-Commercial – Share Alikelicense.

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Flexible Mini Greenhouse-Dome with Pot (clickable)

(Flexibler Treibhausdom mit Topf fr Kruter und Pflanzen – zusammensteckbar)

Your seed, herbs and plants also need a warm environment?

This is my second Greenhouse-Dome based on the same concept as my larger Greenhouse-Dome (clickable) / Treibhausdom:

Based on the two Micro-dome parts hexa and penta from obijuan, i made this Mini Greenhouse-Dome with Pot. With the parts here you can build a full small greenhouse-dome (diameter ca. 19,5 cm)! All you need is a piece of PVC foil and a 3D printer. Even the connecting pieces can be printed. And the whole Greenhouse-Dome can be easy plugged together!

This Mini Greenhouse-Dome is not as flexible as my first dome in diameter but it has its own plant pot, is flexible in height (when your plants growing, it can be easily enlarged ..) and can be labeled with a sign on the dom. So ideal for herbs and small plants.

For one Mini Greenhouse-Dome, you need the following parts + a pvc-foil:

Or with a sign on the Dome-Top: 5x penta (MGD-02) + 1x penta-special (MGD-40) + 1x penta-sign-holder (MGD-41) + a sign (MGD-42, MGD-43, MGD-44, MGD-45 or your own see Print Settings)

10xFolienklammer_fuer_T-End (MGD-06)

10xA-,B-,C- or D-Connector (MGD-10, MGD-11, MGD-12 or MGD-13) or your own length for flexible height.

How the whole Dome is put together, you can see here (2V/L2 Icosahedron Dome):

I added a new part (MGD-07 Folienklammer_lang_fuer_T-End). If you have printed the old plant pot or the dom with the foil not fit nice into the pot, try this part instead of MGD-06.

Improvements to the plant pot. New upload MGD-20_pot_NEW. Not tested but should fit better to the dome. Feedback are welcome!

Print and post a photo. Let your plants grow! Enjoy!

If you have no 3D-printer, you can buy a printed set and more parts here:

I have the parts designed so that they can be printed without support.

The most parts I printed with 10-15% Infill and 2 layer wall (3 or 4 layer on top/bottom).

The clickable bottom-parts (MGD-06 and MGD-07) and the Connecting parts (MGD-10, MGD-11, MGD-12, MGD-13) with 100% Infill.

The Pot with 15% Infill and at the bottom, top and walls with 5 layers (it was waterproof).

I printed it with transparent and white PLA. But for the clickable part (MGD-06) is perhaps ABS better.

With MGD-40 + MGD-41 you can put a sign on the dom. The blanko-sings can be labeled. If you want to print a own Sign, you can use the following tool:

and you can simply plug it on the dome part MGD-41.

MGD-05 and MGD-06 are clickable parts for foil fixation. Cut out the two thin parts of the MGD-06 parts.

With MGD-40 + MGD-41 you can put a sign on the dom. The blanko-sings can be labeled. Or generating your own printable sign (see: Print Settings).

The Greenhouse-Dome is flexible in height and can be used with or without sign on top.

Flexible Mini Greenhouse-Dome with Pot (clickable)

bygraphis licensed under theCreative Commons – Attribution – Non-Commercial – Share Alikelicense.

Say thanks by giving graph a tip and help them continue to share amazing Things with the Thingiverse community.

Were sure graph would love to see what youve printed. Please document your print and share a Make with the community.

To post a Make simply visit this Thing again and clickPost a Maketo start uploading your photo. Its even easier to post a Make via the Thingiverse Mobile app (available viaGoogle PlayandApple App Store).

Say thanks and helpgraphcontinue to share amazing Things with the Thingiverse community.

Youll need a PayPal account to tip graph. Click the button below and you will be redirected to PayPal. Once the payment is complete, youll be brought back to Thingiverse.